The New Waveguide to Coax Adapter Series 60 to 90 GHz

Waveguide to Coax Adapter Series – 60 to 90 GHz



Santa Barbara, CA   January, 2015   Spacek Labs model T12-W is the E-Band adapter in our series of waveguide to coaxial transitions or adapters. The T12-W covers the entire E-Band spectrum from 60 to 90 GHz with a typical insertion loss of 1.5 dB.  This transition can be used to adapt your system from the WR-12 (UG387/U) waveguide to the 1mm coax or vice versa, from coax to waveguide.

Spacek Labs, Inc.,
212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249

The New Waveguide Series V-Band Biased Mixer

Waveguide Series V-Band Biased Mixer



Santa Barbara, CA   January 25th, 2015   Spacek Labs model MV-1B is a wide-band biased mixer with full V-Band coverage in the RF and LO ports. The RF and LO ports span 50 to 75 GHz in WR-15. The local oscillator power is reduced to only 0 to +5 dBm by applying a DC bias. The IF port covers 10 MHz to 3 GHz and is supplied with a DC block on the SMA (f) connector. Conversion loss is 6 dB typ. and 9 dB max.  Lower conversion loss is available on units with reduced bandwidths. The input 1dB compression point is 7 dB below the LO input power. The DC bias requirement is +12 Volts @ 10 mA.

Spacek Labs, Inc.,
212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249

The New Waveguide Series Biased W-Band Mixer with 6X LO Multiplier

Waveguide Series Biased W-Band Mixer with 6X LO Multiplier

Santa Barbara, CA   January, 2015   Spacek Labs model MW-1B-6X is a full-band, biased mixer with a 6X LO frequency multiplier. The RF and multiplied LO ports span from   75 to 110 GHz in WR-10 waveguide. Due to the full W-Band active multiplier on the LO port of the mixer, the LO input frequency ranges from 12.5 to 18.33 GHz at +13 to +18 dBm.     The IF port (SMA-f) covers 10 MHz to 3 GHz and is supplied with a DC block. Conversion loss is 7 dB typ. and 12 dB max. Lower conversion loss is available on units with reduced bandwidths. The input 1dB compression point is -5 dBm (typ).
The DC bias requirement is +12 Volts at 500mA.
Spacek Labs, Inc.,
212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249

The New Waveguide Series E-Band Mixer – Model M80-5X2B

Waveguide Series E-Band Mixer – Model M80-5X2B

Santa Barbara, CA   January, 2015   Spacek Labs model M80-5X2B is an
E-band mixer covering the two radio bands of 71 to 76 GHz and 81 to 86 GHz.
The mixer includes an integrated LO doubler, so that the customer need only supply a
39 GHz source with +16 dBm of power. Spacek Labs can also supply a phase-locked source with the assembly. The conversion loss over the band is 6 dB typ and 9 dB max, with an IF frequency range of 2 to 8 GHz. The input P1dB is -6 dBm typ, and the bias is +12 VDC at 10 mA. The RF ports is WR-12 waveguide, LO input port is 2.92mm coax connector and the IF port connector is SMA (f).
Spacek Labs, Inc.,
212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249


Introducing The HPF-700 Waveguide High Pass Filter

HPF-700 Waveguide High Pass Filter 




Santa Barbara, CA  –  February 12, 2014  

Spacek Labs model HPF-700 is a waveguide high pass filter in WR-12 waveguide. This filter series is designed with a sharp cut off close to the passband. This filter will pass all of E-Band down to 71 GHz with an insertion loss of 1.5 dB typ and 2 dB max. The reject band is </= 68 GHz, with 20 dB rejection at 68 GHz and 40 dB at </=67 GHz. Spacek Labs offers this HPF series of filters up to 110 GHz. They can be customized to suit any application or form factor.

Spacek Labs, Inc.,
212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249

Introducing the E-Band Waveguide Low Pass Filter by Spacek Labs

Introducing The E-Band Waveguide Low Pass Filter


Spacek Labs E Band Filter, Low pass filter, waveguide filter, e-band filter, mm wave filters, low pass

Santa Barbara, CA    January 16th, 2014  

SpacekLabs model LPF1-86-11 is an E-Band low pass filter in WR-12 waveguide. It has a pass band of 71 to 86 GHz with an insertion loss of 1.5 dB typ and 2 dB max. 
The reject band is 91 to 140 GHz, with 20 dB rejection at 91 GHz and 35 dB minimum over the rest of the band.
This series of filters can be made from 18 to 110 GHz and can be designed with a sharp cut off as close as 5% of the band edge frequency.
With full in-house design, manufacturing and testing capability, Spacek Labs can customize these filters to suit any application or form factor.

ISO 9001:2008 Certified
212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249


Spacek Labs Achieves ISO 9001:2008 Certification for Quality Management


Spacek Labs Achieves ISO 9001:2008 Certification for Quality Management





Santa Barbara, CA   December, 2013 

Spacek Labs, a top provider in the design and manufacture of microwave and millimeter-wave products for over 30 years, has received ISO 9001:2008 certification for its Quality Management System.
    
Achieving ISO (Internationals Organization for Standardization) 9001:2008 confirms that premium Quality Management practices are adhered to and a systematic approach to quality processes and testing is taken to ensure consistent product performance and customer satisfaction.
   
  “Delivering the best performing products while maintaining the highest quality standards is the top priority for everyone at Spacek Labs,” said Michael Wilson, CEO and President of Spacek Labs, “achieving ISO 9001:2008 certification speaks to our continuous efforts to improve our quality process across all disciplines, provide first-class customer service and to make certain Spacek Labs products remain synonymous with the best available microwave and millimeter-wave components and subsystems.”
Spacek Labs, Inc.,
212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249

Southeast Atlantic Sales appointed for sales for Spacek Labs.

Sales Representative Appointment
Santa Barbara, CA   August, 2013   Spacek Labs, a manufacturer of microwave and millimeter-wave products for over 30 years has appointed Southeast Atlantic Sales, LLC of Fort Pierce, FL to represent Spacek Labs in Florida, Georgia, North and South Carolina, Alabama, Mississippi, and Tennessee. Southeast Atlantic Sales has over 30 years experience as sales representatives. Their E-mail contact is [email protected]and website is www.southeastatlanticsales.com.


Spacek Labs, Inc.,
212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249

New FSP Series Bandpass Filter from Spacek Labs.

FSP Series Bandpass Filter 
























Santa Barbara, CA  –  November 25th, 2013  

Spacek Labs model FSP94-2 is a narrow (2% bandwidth) bandpass filter from our new line of FSP Series waveguide filters. Designed in WR-10 waveguide, the FSP94-2 has a passband of 2 GHz centered at 94 GHz. The lower and upper 20 dB reject points are 92 and 96 GHz respectively. Insertion loss is 1.5 dB typ and 2.5 dB max.  

These filters are designed and built to your custom requirements utilizing our in-house design and manufacturing facilities. Spacek Labs' engineers can further optimize filter performance by combining our various filter technologies to obtain the best performing filter for your project needs.

     The FSP Series of waveguide bandpass filters are available with center frequencies from 18 up to 110 GHz and have bandwidths from 1 to 10%. Typical insertion loss of this series is as low as 0.5 dB. These filters are also available with coaxial input/output connectors.






 212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249

Introducing The Model M80-5X2B E-Band Mixer by Spacek Labs, Inc.

mm-wave technology
Model M80-5X2B E-Band Mixer

millimeter wave technology e-band mixer
Santa Barbara, CA  –  October 10, 2013   | Spacek Labs, Inc. 

Spacek Labs model M80-5X2B is an E-band mixer covering the two radio bands of 71 to 76 GHz and 81 to 86 GHz. The mixer includes  an integrated LO doubler, so that the customer need only supply a 39 GHz source with +16 dBm of power. Spacek Labs can also supply a phase-locked source with the assembly. The conversion loss over the band is 6 dB typ and 10 dB max, with an IF frequency range of 2 to 8 GHz. The input P1dB is -6 dBm typ, and the bias is +12 VDC @ 10 mA.

Download PDF Overview of the Model M80-5X2B E-Band Mixer

Spacek Labs, Inc.,
212 East Gutierrez Street
Santa Barbara, CA 93101
(805) 564-4404
Fax: (805) 966-3249